Skip to content

Batch Processing

The batch processing utility handles partial failures when processing batches from Amazon SQS, Amazon Kinesis Data Streams, and Amazon DynamoDB Streams.

Key Features

  • Reports batch item failures to reduce number of retries for a record upon errors
  • Simple interface to process each batch record
  • Integrates with Event Source Data Classes and Parser (Pydantic) for self-documenting record schema
  • Build your own batch processor by extending primitives

Background

When using SQS, Kinesis Data Streams, or DynamoDB Streams as a Lambda event source, your Lambda functions are triggered with a batch of messages.

If your function fails to process any message from the batch, the entire batch returns to your queue or stream. This same batch is then retried until either condition happens first: a) your Lambda function returns a successful response, b) record reaches maximum retry attempts, or c) when records expire.

With this utility, batch records are processed individually – only messages that failed to be processed return to the queue or stream for a further retry. This works when two mechanisms are in place:

  1. ReportBatchItemFailures is set in your SQS, Kinesis, or DynamoDB event source properties
  2. A specific response is returned so Lambda knows which records should not be deleted during partial responses
Warning: This utility lowers the chance of processing records more than once; it does not guarantee it

We recommend implementing processing logic in an idempotent manner wherever possible.

You can find more details on how Lambda works with either SQS, Kinesis, or DynamoDB in the AWS Documentation.

Getting started

Regardless whether you're using SQS, Kinesis Data Streams or DynamoDB Streams, you must configure your Lambda function event source to use `ReportBatchItemFailures.

You do not need any additional IAM permissions to use this utility, except for what each event source requires.

Required resources

The remaining sections of the documentation will rely on these samples. For completeness, this demonstrates IAM permissions and Dead Letter Queue where batch records will be sent after 2 retries were attempted.

template.yaml
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
AWSTemplateFormatVersion: '2010-09-09'
Transform: AWS::Serverless-2016-10-31
Description: partial batch response sample

Globals:
    Function:
        Timeout: 5
        MemorySize: 256
        Runtime: python3.9
        Tracing: Active
        Environment:
            Variables:
                LOG_LEVEL: INFO
                POWERTOOLS_SERVICE_NAME: hello

Resources:
    HelloWorldFunction:
        Type: AWS::Serverless::Function
        Properties:
            Handler: app.lambda_handler
            CodeUri: hello_world
            Policies:
                - SQSPollerPolicy:
                    QueueName: !GetAtt SampleQueue.QueueName
            Events:
                Batch:
                    Type: SQS
                    Properties:
                        Queue: !GetAtt SampleQueue.Arn
                        FunctionResponseTypes:
                            - ReportBatchItemFailures

    SampleDLQ:
        Type: AWS::SQS::Queue

    SampleQueue:
        Type: AWS::SQS::Queue
        Properties:
            VisibilityTimeout: 30 # Fn timeout * 6
            RedrivePolicy:
                maxReceiveCount: 2
                deadLetterTargetArn: !GetAtt SampleDLQ.Arn
template.yaml
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
AWSTemplateFormatVersion: '2010-09-09'
Transform: AWS::Serverless-2016-10-31
Description: partial batch response sample

Globals:
    Function:
        Timeout: 5
        MemorySize: 256
        Runtime: python3.9
        Tracing: Active
        Environment:
            Variables:
                LOG_LEVEL: INFO
                POWERTOOLS_SERVICE_NAME: hello

Resources:
    HelloWorldFunction:
        Type: AWS::Serverless::Function
        Properties:
            Handler: app.lambda_handler
            CodeUri: hello_world
            Policies:
                # Lambda Destinations require additional permissions
                # to send failure records to DLQ from Kinesis/DynamoDB
                - Version: "2012-10-17"
                  Statement:
                    Effect: "Allow"
                    Action:
                        - sqs:GetQueueAttributes
                        - sqs:GetQueueUrl
                        - sqs:SendMessage
                    Resource: !GetAtt SampleDLQ.Arn
            Events:
                KinesisStream:
                    Type: Kinesis
                    Properties:
                        Stream: !GetAtt SampleStream.Arn
                        BatchSize: 100
                        StartingPosition: LATEST
                        MaximumRetryAttempts: 2
                        DestinationConfig:
                            OnFailure:
                                Destination: !GetAtt SampleDLQ.Arn
                        FunctionResponseTypes:
                            - ReportBatchItemFailures

    SampleDLQ:
        Type: AWS::SQS::Queue

    SampleStream:
        Type: AWS::Kinesis::Stream
        Properties:
            ShardCount: 1
template.yaml
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
AWSTemplateFormatVersion: '2010-09-09'
Transform: AWS::Serverless-2016-10-31
Description: partial batch response sample

Globals:
    Function:
        Timeout: 5
        MemorySize: 256
        Runtime: python3.9
        Tracing: Active
        Environment:
            Variables:
                LOG_LEVEL: INFO
                POWERTOOLS_SERVICE_NAME: hello

Resources:
    HelloWorldFunction:
        Type: AWS::Serverless::Function
        Properties:
            Handler: app.lambda_handler
            CodeUri: hello_world
            Policies:
                # Lambda Destinations require additional permissions
                # to send failure records from Kinesis/DynamoDB
                - Version: "2012-10-17"
                  Statement:
                    Effect: "Allow"
                    Action:
                        - sqs:GetQueueAttributes
                        - sqs:GetQueueUrl
                        - sqs:SendMessage
                    Resource: !GetAtt SampleDLQ.Arn
            Events:
                DynamoDBStream:
                    Type: DynamoDB
                    Properties:
                        Stream: !GetAtt SampleTable.StreamArn
                        StartingPosition: LATEST
                        MaximumRetryAttempts: 2
                        DestinationConfig:
                            OnFailure:
                                Destination: !GetAtt SampleDLQ.Arn
                        FunctionResponseTypes:
                            - ReportBatchItemFailures

    SampleDLQ:
        Type: AWS::SQS::Queue

    SampleTable:
        Type: AWS::DynamoDB::Table
        Properties:
            BillingMode: PAY_PER_REQUEST
            AttributeDefinitions:
                - AttributeName: pk
                  AttributeType: S
                - AttributeName: sk
                  AttributeType: S
            KeySchema:
                - AttributeName: pk
                  KeyType: HASH
                - AttributeName: sk
                  KeyType: RANGE
            SSESpecification:
                SSEEnabled: yes
            StreamSpecification:
                StreamViewType: NEW_AND_OLD_IMAGES

Processing messages from SQS

Processing batches from SQS works in four stages:

  1. Instantiate BatchProcessor and choose EventType.SQS for the event type
  2. Define your function to handle each batch record, and use SQSRecord type annotation for autocompletion
  3. Use either batch_processor decorator or your instantiated processor as a context manager to kick off processing
  4. Return the appropriate response contract to Lambda via .response() processor method
Info

This code example optionally uses Tracer and Logger for completion.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: SQSRecord):
    payload: str = record.body
    if payload:
        item: dict = json.loads(payload)
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: SQSRecord):
    payload: str = record.body
    if payload:
        item: dict = json.loads(payload)
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
def lambda_handler(event, context: LambdaContext):
    batch = event["Records"]
    with processor(records=batch, handler=record_handler):
        processed_messages = processor.process() # kick off processing, return list[tuple]

    return processor.response()

The second record failed to be processed, therefore the processor added its message ID in the response.

1
2
3
4
5
6
7
{
    'batchItemFailures': [
        {
            'itemIdentifier': '244fc6b4-87a3-44ab-83d2-361172410c3a'
        }
    ]
}

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
{
    "Records": [
        {
            "messageId": "059f36b4-87a3-44ab-83d2-661975830a7d",
            "receiptHandle": "AQEBwJnKyrHigUMZj6rYigCgxlaS3SLy0a",
            "body": "{\"Message\": \"success\"}",
            "attributes": {
                "ApproximateReceiveCount": "1",
                "SentTimestamp": "1545082649183",
                "SenderId": "AIDAIENQZJOLO23YVJ4VO",
                "ApproximateFirstReceiveTimestamp": "1545082649185"
            },
            "messageAttributes": {},
            "md5OfBody": "e4e68fb7bd0e697a0ae8f1bb342846b3",
            "eventSource": "aws:sqs",
            "eventSourceARN": "arn:aws:sqs:us-east-2: 123456789012:my-queue",
            "awsRegion": "us-east-1"
        },
        {
            "messageId": "244fc6b4-87a3-44ab-83d2-361172410c3a",
            "receiptHandle": "AQEBwJnKyrHigUMZj6rYigCgxlaS3SLy0a",
            "body": "SGVsbG8sIHRoaXMgaXMgYSB0ZXN0Lg==",
            "attributes": {
                "ApproximateReceiveCount": "1",
                "SentTimestamp": "1545082649183",
                "SenderId": "AIDAIENQZJOLO23YVJ4VO",
                "ApproximateFirstReceiveTimestamp": "1545082649185"
            },
            "messageAttributes": {},
            "md5OfBody": "e4e68fb7bd0e697a0ae8f1bb342846b3",
            "eventSource": "aws:sqs",
            "eventSourceARN": "arn:aws:sqs:us-east-2: 123456789012:my-queue",
            "awsRegion": "us-east-1"
        }
    ]
}

Processing messages from Kinesis

Processing batches from Kinesis works in four stages:

  1. Instantiate BatchProcessor and choose EventType.KinesisDataStreams for the event type
  2. Define your function to handle each batch record, and use KinesisStreamRecord type annotation for autocompletion
  3. Use either batch_processor decorator or your instantiated processor as a context manager to kick off processing
  4. Return the appropriate response contract to Lambda via .response() processor method
Info

This code example optionally uses Tracer and Logger for completion.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.kinesis_stream_event import KinesisStreamRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.KinesisDataStreams)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: KinesisStreamRecord):
    logger.info(record.kinesis.data_as_text)
    payload: dict = record.kinesis.data_as_json()
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.kinesis_stream_event import KinesisStreamRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.KinesisDataStreams)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: KinesisStreamRecord):
    logger.info(record.kinesis.data_as_text)
    payload: dict = record.kinesis.data_as_json()
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
def lambda_handler(event, context: LambdaContext):
    batch = event["Records"]
    with processor(records=batch, handler=record_handler):
        processed_messages = processor.process() # kick off processing, return list[tuple]

    return processor.response()

The second record failed to be processed, therefore the processor added its sequence number in the response.

1
2
3
4
5
6
7
{
    'batchItemFailures': [
        {
            'itemIdentifier': '6006958808509702859251049540584488075644979031228738'
        }
    ]
}

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
{
    "Records": [
        {
            "kinesis": {
                "kinesisSchemaVersion": "1.0",
                "partitionKey": "1",
                "sequenceNumber": "4107859083838847772757075850904226111829882106684065",
                "data": "eyJNZXNzYWdlIjogInN1Y2Nlc3MifQ==",
                "approximateArrivalTimestamp": 1545084650.987
            },
            "eventSource": "aws:kinesis",
            "eventVersion": "1.0",
            "eventID": "shardId-000000000006:4107859083838847772757075850904226111829882106684065",
            "eventName": "aws:kinesis:record",
            "invokeIdentityArn": "arn:aws:iam::123456789012:role/lambda-role",
            "awsRegion": "us-east-2",
            "eventSourceARN": "arn:aws:kinesis:us-east-2:123456789012:stream/lambda-stream"
        },
        {
            "kinesis": {
                "kinesisSchemaVersion": "1.0",
                "partitionKey": "1",
                "sequenceNumber": "6006958808509702859251049540584488075644979031228738",
                "data": "c3VjY2Vzcw==",
                "approximateArrivalTimestamp": 1545084650.987
            },
            "eventSource": "aws:kinesis",
            "eventVersion": "1.0",
            "eventID": "shardId-000000000006:6006958808509702859251049540584488075644979031228738",
            "eventName": "aws:kinesis:record",
            "invokeIdentityArn": "arn:aws:iam::123456789012:role/lambda-role",
            "awsRegion": "us-east-2",
            "eventSourceARN": "arn:aws:kinesis:us-east-2:123456789012:stream/lambda-stream"
        }
    ]
}

Processing messages from DynamoDB

Processing batches from Kinesis works in four stages:

  1. Instantiate BatchProcessor and choose EventType.DynamoDBStreams for the event type
  2. Define your function to handle each batch record, and use DynamoDBRecord type annotation for autocompletion
  3. Use either batch_processor decorator or your instantiated processor as a context manager to kick off processing
  4. Return the appropriate response contract to Lambda via .response() processor method
Info

This code example optionally uses Tracer and Logger for completion.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.dynamo_db_stream_event import DynamoDBRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.DynamoDBStreams)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: DynamoDBRecord):
    logger.info(record.dynamodb.new_image)
    payload: dict = json.loads(record.dynamodb.new_image.get("Message"))
    # alternatively:
    # changes: Dict[str, Any] = record.dynamodb.new_image
    # payload = change.get("Message").raw_event -> {"S": "<payload>"}
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.dynamo_db_stream_event import DynamoDBRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.DynamoDBStreams)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: DynamoDBRecord):
    logger.info(record.dynamodb.new_image)
    payload: dict = json.loads(record.dynamodb.new_image.get("item"))
    # alternatively:
    # changes: Dict[str, Any] = record.dynamodb.new_image
    # payload = change.get("Message") -> "<payload>"
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
def lambda_handler(event, context: LambdaContext):
    batch = event["Records"]
    with processor(records=batch, handler=record_handler):
        processed_messages = processor.process() # kick off processing, return list[tuple]

    return processor.response()

The second record failed to be processed, therefore the processor added its sequence number in the response.

1
2
3
4
5
6
7
{
    'batchItemFailures': [
        {
            'itemIdentifier': '8640712661'
        }
    ]
}

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
{
    "Records": [
        {
            "eventID": "1",
            "eventVersion": "1.0",
            "dynamodb": {
                "Keys": {
                    "Id": {
                        "N": "101"
                    }
                },
                "NewImage": {
                    "Message": {
                        "S": "failure"
                    }
                },
                "StreamViewType": "NEW_AND_OLD_IMAGES",
                "SequenceNumber": "3275880929",
                "SizeBytes": 26
            },
            "awsRegion": "us-west-2",
            "eventName": "INSERT",
            "eventSourceARN": "eventsource_arn",
            "eventSource": "aws:dynamodb"
        },
        {
            "eventID": "1",
            "eventVersion": "1.0",
            "dynamodb": {
                "Keys": {
                    "Id": {
                        "N": "101"
                    }
                },
                "NewImage": {
                    "SomethingElse": {
                        "S": "success"
                    }
                },
                "StreamViewType": "NEW_AND_OLD_IMAGES",
                "SequenceNumber": "8640712661",
                "SizeBytes": 26
            },
            "awsRegion": "us-west-2",
            "eventName": "INSERT",
            "eventSourceARN": "eventsource_arn",
            "eventSource": "aws:dynamodb"
        }
    ]
}

Partial failure mechanics

All records in the batch will be passed to this handler for processing, even if exceptions are thrown - Here's the behaviour after completing the batch:

  • All records successfully processed. We will return an empty list of item failures {'batchItemFailures': []}
  • Partial success with some exceptions. We will return a list of all item IDs/sequence numbers that failed processing
  • All records failed to be processed. We will raise BatchProcessingError exception with a list of all exceptions raised when processing
Warning

You will not have access to the processed messages within the Lambda Handler; use context manager for that.

All processing logic will and should be performed by the record_handler function.

Advanced

Pydantic integration

You can bring your own Pydantic models via model parameter when inheriting from SqsRecordModel, KinesisDataStreamRecord, or DynamoDBStreamRecordModel

Inheritance is importance because we need to access message IDs and sequence numbers from these records in the event of failure. Mypy is fully integrated with this utility, so it should identify whether you're passing the incorrect Model.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.parser.models import SqsRecordModel
from aws_lambda_powertools.utilities.typing import LambdaContext


class Order(BaseModel):
    item: dict

class OrderSqsRecord(SqsRecordModel):
    body: Order

    # auto transform json string
    # so Pydantic can auto-initialize nested Order model
    @validator("body", pre=True)
    def transform_body_to_dict(cls, value: str):
        return json.loads(value)

processor = BatchProcessor(event_type=EventType.SQS, model=OrderSqsRecord)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: OrderSqsRecord):
    return record.body.item

@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.parser.models import KinesisDataStreamRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


class Order(BaseModel):
    item: dict

class OrderKinesisPayloadRecord(KinesisDataStreamRecordPayload):
    data: Order

    # auto transform json string
    # so Pydantic can auto-initialize nested Order model
    @validator("data", pre=True)
    def transform_message_to_dict(cls, value: str):
        # Powertools KinesisDataStreamRecordModel already decodes b64 to str here
        return json.loads(value)

class OrderKinesisRecord(KinesisDataStreamRecordModel):
    kinesis: OrderKinesisPayloadRecord


processor = BatchProcessor(event_type=EventType.KinesisDataStreams, model=OrderKinesisRecord)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: OrderKinesisRecord):
    return record.kinesis.data.item


@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
import json

from typing import Dict, Literal

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.parser.models import DynamoDBStreamRecordModel
from aws_lambda_powertools.utilities.typing import LambdaContext


class Order(BaseModel):
    item: dict

class OrderDynamoDB(BaseModel):
    Message: Order

    # auto transform json string
    # so Pydantic can auto-initialize nested Order model
    @validator("Message", pre=True)
    def transform_message_to_dict(cls, value: Dict[Literal["S"], str]):
        return json.loads(value["S"])

class OrderDynamoDBChangeRecord(DynamoDBStreamChangedRecordModel):
    NewImage: Optional[OrderDynamoDB]
    OldImage: Optional[OrderDynamoDB]

class OrderDynamoDBRecord(DynamoDBStreamRecordModel):
    dynamodb: OrderDynamoDBChangeRecord


processor = BatchProcessor(event_type=EventType.DynamoDBStreams, model=OrderKinesisRecord)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: OrderDynamoDBRecord):
    return record.dynamodb.NewImage.Message.item


@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

Accessing processed messages

Use the context manager to access a list of all returned values from your record_handler function.

  • When successful. We will include a tuple with success, the result of record_handler, and the batch record
  • When failed. We will include a tuple with fail, exception as a string, and the batch record
Accessing processed messages via context manager
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
import json

from typing import Any, List, Literal, Union

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import (BatchProcessor,
                                                   EventType,
                                                   FailureResponse,
                                                   SuccessResponse,
                                                   batch_processor)
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: SQSRecord):
    payload: str = record.body
    if payload:
        item: dict = json.loads(payload)
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
def lambda_handler(event, context: LambdaContext):
    batch = event["Records"]
    with processor(records=batch, handler=record_handler):
        processed_messages: List[Union[SuccessResponse, FailureResponse]] = processor.process()

    for message in processed_messages:
        status: Union[Literal["success"], Literal["fail"]] = message[0]
        result: Any = message[1]
        record: SQSRecord = message[2]


    return processor.response()

Accessing Lambda Context

Within your record_handler function, you might need access to the Lambda context to determine how much time you have left before your function times out.

We can automatically inject the Lambda context into your record_handler if your function signature has a parameter named lambda_context. When using a context manager, you also need to pass the Lambda context object like in the example below.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
from typing import Optional

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import (BatchProcessor, EventType,
                                                   batch_processor)
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext

processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: SQSRecord, lambda_context: Optional[LambdaContext] = None):
    if lambda_context is not None:
        remaining_time = lambda_context.get_remaining_time_in_millis()
    ...


@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
from typing import Optional

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext

processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: SQSRecord, lambda_context: Optional[LambdaContext] = None):
    if lambda_context is not None:
        remaining_time = lambda_context.get_remaining_time_in_millis()
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
def lambda_handler(event, context: LambdaContext):
    batch = event["Records"]
    with processor(records=batch, handler=record_handler, lambda_context=context):
        result = processor.process()

    return result

Extending BatchProcessor

You might want to bring custom logic to the existing BatchProcessor to slightly override how we handle successes and failures.

For these scenarios, you can subclass BatchProcessor and quickly override success_handler and failure_handler methods:

  • success_handler() – Keeps track of successful batch records
  • failure_handler() – Keeps track of failed batch records
Example

Let's suppose you'd like to add a metric named BatchRecordFailures for each batch record that failed processing

Extending failure handling mechanism in BatchProcessor
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
from typing import Tuple

from aws_lambda_powertools import Metrics
from aws_lambda_powertools.metrics import MetricUnit
from aws_lambda_powertools.utilities.batch import batch_processor, BatchProcessor, ExceptionInfo, EventType, FailureResponse
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord


class MyProcessor(BatchProcessor):
    def failure_handler(self, record: SQSRecord, exception: ExceptionInfo) -> FailureResponse:
        metrics.add_metric(name="BatchRecordFailures", unit=MetricUnit.Count, value=1)
        return super().failure_handler(record, exception)

processor = MyProcessor(event_type=EventType.SQS)
metrics = Metrics(namespace="test")


@tracer.capture_method
def record_handler(record: SQSRecord):
    payload: str = record.body
    if payload:
        item: dict = json.loads(payload)
    ...

@metrics.log_metrics(capture_cold_start_metric=True)
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

Create your own partial processor

You can create your own partial batch processor from scratch by inheriting the BasePartialProcessor class, and implementing _prepare(), _clean() and _process_record().

  • _process_record() – handles all processing logic for each individual message of a batch, including calling the record_handler (self.handler)
  • _prepare() – called once as part of the processor initialization
  • clean() – teardown logic called once after _process_record completes

You can then use this class as a context manager, or pass it to batch_processor to use as a decorator on your Lambda handler function.

Creating a custom batch processor
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
from random import randint

from aws_lambda_powertools.utilities.batch import BasePartialProcessor, batch_processor
import boto3
import os

table_name = os.getenv("TABLE_NAME", "table_not_found")

class MyPartialProcessor(BasePartialProcessor):
    """
    Process a record and stores successful results at a Amazon DynamoDB Table

    Parameters
    ----------
    table_name: str
        DynamoDB table name to write results to
    """

    def __init__(self, table_name: str):
        self.table_name = table_name

        super().__init__()

    def _prepare(self):
        # It's called once, *before* processing
        # Creates table resource and clean previous results
        self.ddb_table = boto3.resource("dynamodb").Table(self.table_name)
        self.success_messages.clear()

    def _clean(self):
        # It's called once, *after* closing processing all records (closing the context manager)
        # Here we're sending, at once, all successful messages to a ddb table
        with self.ddb_table.batch_writer() as batch:
            for result in self.success_messages:
                batch.put_item(Item=result)

    def _process_record(self, record):
        # It handles how your record is processed
        # Here we're keeping the status of each run
        # where self.handler is the record_handler function passed as an argument
        try:
            result = self.handler(record) # record_handler passed to decorator/context manager
            return self.success_handler(record, result)
        except Exception as exc:
            return self.failure_handler(record, exc)

    def success_handler(self, record):
        entry = ("success", result, record)
        message = {"age": result}
        self.success_messages.append(message)
        return entry


def record_handler(record):
    return randint(0, 100)

@batch_processor(record_handler=record_handler, processor=MyPartialProcessor(table_name))
def lambda_handler(event, context):
    return {"statusCode": 200}

Caveats

Tracer response auto-capture for large batch sizes

When using Tracer to capture responses for each batch record processing, you might exceed 64K of tracing data depending on what you return from your record_handler function, or how big is your batch size.

If that's the case, you can configure Tracer to disable response auto-capturing.

Disabling Tracer response auto-capturing
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method(capture_response=False)
def record_handler(record: SQSRecord):
    payload: str = record.body
    if payload:
        item: dict = json.loads(payload)
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()

Testing your code

As there is no external calls, you can unit test your code with BatchProcessor quite easily.

Example:

Given a SQS batch where the first batch record succeeds and the second fails processing, we should have a single item reported in the function response.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
import json

from pathlib import Path
from dataclasses import dataclass

import pytest
from src.app import lambda_handler, processor


def load_event(path: Path):
    with path.open() as f:
        return json.load(f)


@pytest.fixture
def lambda_context():
    @dataclass
    class LambdaContext:
        function_name: str = "test"
        memory_limit_in_mb: int = 128
        invoked_function_arn: str = "arn:aws:lambda:eu-west-1:809313241:function:test"
        aws_request_id: str = "52fdfc07-2182-154f-163f-5f0f9a621d72"

    return LambdaContext()

@pytest.fixture()
def sqs_event():
    """Generates API GW Event"""
    return load_event(path=Path("events/sqs_event.json"))


def test_app_batch_partial_response(sqs_event, lambda_context):
    # GIVEN
    processor = app.processor  # access processor for additional assertions
    successful_record = sqs_event["Records"][0]
    failed_record = sqs_event["Records"][1]
    expected_response = {
        "batchItemFailures: [
            {
                "itemIdentifier": failed_record["messageId"]
            }
        ]
    }

    # WHEN
    ret = app.lambda_handler(sqs_event, lambda_context)

    # THEN
    assert ret == expected_response
    assert len(processor.fail_messages) == 1
    assert processor.success_messages[0] == successful_record

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
import json

from aws_lambda_powertools import Logger, Tracer
from aws_lambda_powertools.utilities.batch import BatchProcessor, EventType, batch_processor
from aws_lambda_powertools.utilities.data_classes.sqs_event import SQSRecord
from aws_lambda_powertools.utilities.typing import LambdaContext


processor = BatchProcessor(event_type=EventType.SQS)
tracer = Tracer()
logger = Logger()


@tracer.capture_method
def record_handler(record: SQSRecord):
    payload: str = record.body
    if payload:
        item: dict = json.loads(payload)
    ...

@logger.inject_lambda_context
@tracer.capture_lambda_handler
@batch_processor(record_handler=record_handler, processor=processor)
def lambda_handler(event, context: LambdaContext):
    return processor.response()
events/sqs_sample.json
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
{
    "Records": [
        {
            "messageId": "059f36b4-87a3-44ab-83d2-661975830a7d",
            "receiptHandle": "AQEBwJnKyrHigUMZj6rYigCgxlaS3SLy0a",
            "body": "{\"Message\": \"success\"}",
            "attributes": {
                "ApproximateReceiveCount": "1",
                "SentTimestamp": "1545082649183",
                "SenderId": "AIDAIENQZJOLO23YVJ4VO",
                "ApproximateFirstReceiveTimestamp": "1545082649185"
            },
            "messageAttributes": {},
            "md5OfBody": "e4e68fb7bd0e697a0ae8f1bb342846b3",
            "eventSource": "aws:sqs",
            "eventSourceARN": "arn:aws:sqs:us-east-2: 123456789012:my-queue",
            "awsRegion": "us-east-1"
        },
        {
            "messageId": "244fc6b4-87a3-44ab-83d2-361172410c3a",
            "receiptHandle": "AQEBwJnKyrHigUMZj6rYigCgxlaS3SLy0a",
            "body": "SGVsbG8sIHRoaXMgaXMgYSB0ZXN0Lg==",
            "attributes": {
                "ApproximateReceiveCount": "1",
                "SentTimestamp": "1545082649183",
                "SenderId": "AIDAIENQZJOLO23YVJ4VO",
                "ApproximateFirstReceiveTimestamp": "1545082649185"
            },
            "messageAttributes": {},
            "md5OfBody": "e4e68fb7bd0e697a0ae8f1bb342846b3",
            "eventSource": "aws:sqs",
            "eventSourceARN": "arn:aws:sqs:us-east-2: 123456789012:my-queue",
            "awsRegion": "us-east-1"
        }
    ]
}

FAQ

Choosing between decorator and context manager

Use context manager when you want access to the processed messages or handle BatchProcessingError exception when all records within the batch fail to be processed.

Integrating exception handling with Sentry.io

When using Sentry.io for error monitoring, you can override failure_handler to capture each processing exception with Sentry SDK:

Credits to Charles-Axel Dein

Integrating error tracking with Sentry.io
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
from typing import Tuple

from aws_lambda_powertools.utilities.batch import BatchProcessor, FailureResponse
from sentry_sdk import capture_exception


class MyProcessor(BatchProcessor):
    def failure_handler(self, record, exception) -> FailureResponse:
        capture_exception()  # send exception to Sentry
        return super().failure_handler(record, exception)
Last update: 2022-10-21